Related Links

Resin Wizard
Resin Navigator
Industry Links

Marine Resins

Marine ResinsMarine Vinyl Ester Resins

CORVE8121LH-10

This is a promoted, thixotropic, 100% vinyl ester resin that exhibits excellent physical properties along with fast hardness development for the spray-up and hand lay-up applications of the boat and pool manufacturing industries. CORVE8121LH series of products contain a maximum of 35% styrene (HAP) by weight, which meets the EPA 40 CFR Part 63 requirements of the National Emission Standards for Hazardous Air Pollutants (HAP) for Boat Manufacturing. This product also meets the current VOC requirements of California SCAQMD Rule 1162 for "High Strength Resin".


MVR8071

MVR8071 is a promoted, non-thixotropic, vinyl ester/polyester resin blend. It is designed for the fabrication of large parts using the vacuum infusion process (VIP).


MVR8031

This is a promoted, thixotropic, modified vinyl ester resin. It is designed for marine laminate construction where optimum properties in physicals, hydrolytic stability, and surface characteristic retention are desired. This product has been evaluated for blistering of gel-coated panels exposed to boiling water. These panels typically withstand 150-170 hours of boiling water immersion before any signs of blistering occur.


MVR8031LH-15

This product is a promoted, thixotropic, modified vinyl ester resin designed for marine laminate construction. It contains a maximum of 35% styrene (HAP) by weight, meeting the EPA requirements for the National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing as well as the high strength requirements in the National Emission Standards for Hazardous Air Pollutants for Reinforced Plastic Composites Production.


MVR8011

MVR8011 is a promoted, thixotropic, modified vinyl ester resin that exhibits excellent physical properties with fast hardness development for the spray-up and hand lay-up applications of the boat spa, and pool manufacturing industries. It contains a maximum of 35% styrene (HAP) by weight which meets the EPA 40 CFR Part 63 requirements of the National Emission Standards for Hazardous Air Pollutants (HAP) for boat manufacturing. This product also meets the current VOC requirements of California SCAQMD Rule 1162 for "High Strength Resin".



Marine DCPD Laminating Resins

COR61-AA-131

This is a marine grade, low profile, low shrink, unsaturated polyester laminating resin designed for use in the production of boats, canoes, recreational vehicles (RVs), and general fiberglass parts. It meets the EPA 40 CFR Part 63 Volume 66, No. 163 National Emission Standards for Hazardous Air Pollutants for boat manufacturing requirement of maximum 35% HAP content (styrene). COR61-AA-131 is designed for short demold times.


COR61-AA-340

COR61-AA-340 is a marine grade, low profile, low shrink, unsaturated polyester laminating resin designed for use in the production of boats, canoes, recreational vehicles (RVs), and general fiberglass parts. It meets the EPA 40 CFR Part 63 Volume 66, No. 163 National Emission Standards for Hazardous Air Pollutants for boat manufacturing requirement of maximum 35% HAP content (styrene). This resin is designed to work for long demold times.


COR61-AA-213S

This product is a marine grade, low profile, low shrink, high performance DCPD/Isophthalic acid blended unsaturated polyester laminating resin used in the manufacture of glass fiber reinforced composites.


COR61-AA-200

COR61-AA-200 is a high performance, low profile, low shrink DCPD/Isophthalic acid blended unsaturated polyester laminating resin used in the manufacture of glass fiber reinforced composites. It meets the EPA 40 CFR Part 63 Volume 66, No. 163 National Emission Standards for Hazardous Air Pollutants for boat manufacturing requirement of maximum 35% HAP content (styrene).



Marine Ortho Laminating Resins

COR63-AA-350

This is a low exotherm, semi-rigid, unsaturated polyester laminating resin designed for use in medium to thick laminates such as boat hulls and decks. This product contains a maximum of 35% styrene (HAP) by weight, which meets the EPA 40 CFR Part 63 requirements of the National Emission Standards for Hazardous Air Pollutants (HAP) for boat manufacturing and National Emissions Standards for Hazardous Air Pollutants.


COR63-AA-300

COR63-AA-300 is a low exotherm, semi-rigid, unsaturated polyester laminating resin designed for use in medium to thick laminates such as boat hulls and decks. It contains less than 35% styrene which meets 40 CFR Part 63: National Emissions Standards for Hazardous Air Pollutants for Boat Manufacturing: 40 CFR part 63 National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastics Composites Production and SCAQMD Rule 1162.


COR65-AA-405

THis product is a low exotherm, semi-rigid, unsaturated polyester laminating resin designed for use in medium to thick laminates such as boat hulls and decks. It contains less than 35% styrene which meets 40 CFR Part 63: National Emissions Standards for Hazardous Air Pollutants for Boat Manufacturing: 40 CFR part 63 National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastics Composites Production and SCAQMD Rule 1162.