Related Links

Industry Links

Open Mold and Laminating

DCPD Laminating Resins

COR61-AA-131

This product is a marine grade, low profile, low shrink, unsaturated polyester laminating resin designed for use in the production of boats, canoes, recreational vehicles (RVs), and general fiberglass parts. It meets the EPA 40 CFR Part 63 Volume 66, No. 163 National Emission Standards for Hazardous Air Pollutants for boat manufacturing requirement of maximum 35% HAP content (styrene). Designed for short demold times.


COR61-AA-340

This is a marine grade, low profile, low shrink, unsaturated polyester laminating resin designed for use in the production of boats, canoes, recreational vehicles (RVs), and general fiberglass parts. It meets the EPA 40 CFR Part 63 Volume 66, No. 163 National Emission Standards for Hazardous Air Pollutants for boat manufacturing requirement of maximum 35% HAP content (styrene). Designed to work for long demold times.


COR61-AA-213S

COR61-AA-213S is a marine grade, low profile, low shrink, high performance DCPD/Isophthalic acid blended unsaturated polyester laminating resin used in the manufacture of glass fiber reinforced composites.


COR61-AA-200

This product is a high performance, low profile, low shrink DCPD/Isophthalic acid blended unsaturated polyester laminating resin used in the manufacture of glass fiber reinforced composites. It meets the EPA 40 CFR Part 63 Volume 66, No. 163 National Emission Standards for Hazardous Air Pollutants for boat manufacturing requirement of maximum 35% HAP content (styrene).



Ortho Laminating Resins

COR63-AA-350

COR63-AA-350 is a low exotherm, semi-rigid, unsaturated polyester laminating resin designed for use in medium to thick laminates such as boat hulls and decks. This product contains a maximum of 35% styrene (HAP) by weight, which meets the EPA 40 CFR Part 63 requirements of the National Emission Standards for Hazardous Air Pollutants (HAP) for boat manufacturing and National Emissions Standards for Hazardous Air Pollutants.


COR63-AA-300

A low exotherm, semi-rigid, unsaturated polyester laminating resin designed for use in medium to thick laminates such as boat hulls and decks. It contains less than 35% styrene which meets 40 CFR Part 63: National Emissions Standards for Hazardous Air Pollutants for Boat Manufacturing: 40 CFR part 63 National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastics Composites Production and SCAQMD Rule 1162.


COR65-AA-405

This product is a low exotherm, unsaturated polyester laminating resin designed for use in medium to thick laminates such as boat hulls and decks. This product contains a maximum of 35% styrene (HAP) by weight, which meets the EPA 40 CFR Part 63 requirements of the National Emission Standards for Hazardous Air Pollutants (HAP) for Boat Manufacturing and National Emissions Standards for Hazardous Air Pollutants.


COR65-AA-213

COR65-AA-213 is an orthophthalic, promoted, thixotropic, semi-rigid unsaturated polyester resin used in the manufacture of medium to thick fiberglass reinforced laminates. It contains less than 35% styrene which meets 40 CFR Part 63: National Emissions Standards for Hazardous Air Pollutants for Boat Manufacturing, 40 CFR Part 63: National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastics Composites Production and SCAQMED Rule 1162.


COR65-AA-215

This is an orthophthalic, promoted, thixotropic, semi-rigid unsaturated polyester resin used in the manufacture of medium to thick fiberglass reinforced laminates. It contains less than 35% styrene which meets 40 CFR Part 63: National Emissions Standards for Hazardous Air Pollutants for Boat Manufacturing, 40 CFR Part 63: National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastics Composites Production and SCAQMED Rule 1162.